Tractor PTO Molasses Oil Pump
Have a similar machine to sell? List yours now for $33.
Other
Queensland
N/A
N/A
- Details
47 Eagleview Place, Eagle Form Queensland 4009
Map
Directions:
Seller's Comment
Tractor PTO Molasses Oil Pump
Description
Portable tractor PTO driven gear pumps by Paddock Machinery. These pumps are ideal for pumping molasses, oils, tallows, fertilisers, bitumen, diesel, kerosene and other solutions. Use the power of your farm tractors PTO to pump a range of fluids including those with a very high viscosity.
Paddock PTO Tractor Molasses Gear Pump
- Transfer Pump 3" size available with flow rate up to 26,000 L/hr
- High discharge pressures for long distance transfers
- Suitable for use with Cat I tractors
- Attaches to 3 point linkage setup
- Includes PTO shaft, pins and transport frame
PTO Pump Applications
Every farmer knows the power and reliability of their tractor and power take off (PTO) system. No more messing around with small engines or maintaining a dedicated trailer pump engine, instead use your existing tractors reliable diesel engine and PTO system to pump oils, molasses and other highly viscous fluids. Quickly mobilise this pump on the back of your tractor to areas otherwise difficult to access. Engage the standard 540 rpm PTO shaft and the pump begins operation. Vary the PTO speed and engine rpm to change your discharge pressure and flow rate. Ideal for large transfer operations where time is of the essence.
Pumping Molasses
When pumping molasses the key is to run these gear pumps at a maximum of 200 rpm. With the direct coupling to your tractor this is as simple as reducing the tractors RPM so the standard 540 rpm PTO speed is lowered.
Molasses can be highly viscous when cold so care needs to be taken to ensure your pump is not starved of flow and this is best achieved by a elevated molasses supply tank, short suction lines and large diameters. Heating your molasses tank will also help it flow. Starving these pumps of supply can cause cavitation and eventual damage/destruction of the gears so it's important to monitor your operation especially when new.
Tractor PTO Pump Unit Features
The heavy duty cast iron design of these pumps makes them simple and robust. They use a shaft packing gland and bush design. The fluid itself provides the lubrication for the meshing gears so this needs consideration if you're looking to use this pump with solutions which don't naturally lubricate. The pumps themselves are supplied with a Teflon packing gland which is ideal for use with molasses.
Each kit is supplied with the 3-point linkage arms and a PTO shaft. The PTO shaft includes a slip yoke which provides the adjustment for variances in tractor sizes and configurations.
Mounted to a powder coated steel transport frame makes relocation and transport a breeze. Quick to deploy and fast to pack up.
Linkage and Compatibility for Farming Pump
These units are configured for standard three point linkage (3PL) for Category 1 (Cat I) tractors with a PTO speed up to 540 RPM. Suited to tractors with the industry standard 1-3/8" 6-spine connection.
PTO Pump Specifications
| SKU | SPTOGC80 |
|---|---|
| Pump Style | Gear |
| Inlet / Outlet | 3" / 3" |
| Flow rate |
220 L/min @ 200 rpm 440 L/min @ 400 rpm Max. Pump Speed 600 rpm |
| Discharge Head | 30 m |
| Suction Lift | 4.5 m |
| Tractor Power Range | 25 hp + |
| PTO Speed | up to 540 RPM |
| Linkage | Cat I - Three Point Tractor Linkage |
| Construction | Heavy duty cast iron pump |
| PTO Input Shaft | Included, 1-3/8" 6 spline |
| Max. Fluid Temperature | 60 C |
| Weight | ~100 kg |
| Dimensions | 660 (w) x 660 (l) x 880 (h) mm |
| Warranty | 12 Months |
Note: For ease of shipping some basic assembly will be required on arrival. PTO shaft may require shortening depending on type of tractor, this can be done with a hacksaw.
Similar machines
Similar machines in same suburb
Related articles
* Above example based 60 months with 10% deposit at an interest rate of 6.85% p.a. These payments are intended as a guide only. Different amounts, terms and your credit profile may result in different comparison rates and payments. Costs such as redraw fees or early repayment fees and cost savings such as fee waivers, are not included in this example but may influence the cost of the loan. An exact quote must be obtained at the time of application. Please see a staff member for further terms and conditions and your financial adviser for any further information. This information is correct as of 22/11/2024 Comparison rate 6.85% p.a based on a $30,000 loan amount on a 60-month term and 10% deposit.
Join us now to get more benefits!
Save unlimited machines
Save searches
Access on any device
Already have an account? Sign In
Selected Machines0
Clear AllBrowse Machines for Sale by All Locations
- Australian Capital Territory
- New South Wales
- Northern Territory
- Queensland
- South Australia
- Tasmania
- Victoria
- Western Australia
Browse Machines for Sale by All Makes Unknown Unknown
- 1800MM GP BUCKET (ZX670)
- 200MM Service Bucket
- 300MM AUGER
- 540mm BUCKET
- 600MM GP
- 8x4
- 900MM WIDE LIGHTWEIGHT FINAL TRIM MUD BUCKET
- AUGER TORQUE DRIVE + AUGERS
- BINBLASTER
- CX10T
- DUMPMASTER
- DUMPMASTER SS
- EDT 100
- EDT200
- FILTER KITS
- GP-05
- HIFLOW
- HYDRAULIC THUMB BUCKET 1.5T -2 T EXCAVATORS
- MEGADUMPER
- MINI EXCAVATOR TRACKS
- MULTI-TIP
- NEW ALLOY RAMPS
- Set Of Padfoot Shells
- STICK RAKE TO SUIT D7
- TILTING MUD BUCKET
- Unknown